Professional Solutions Delivered Directly to Your Location
Digested Organics offers specialized onsite pilot testing services and rentals, tailored for wastewater treatment and process separations. Our approach includes a one-week onsite trial by skilled operators using advanced equipment to simulate commercial operations. This service, designed to gather crucial operational data and generate samples for further analysis, emphasizes the practical application and efficiency of their technology in real-world settings.
Rental Ultrafiltration System
One Week to Discover Onsite Testing Efficiency
Experience the efficiency of our equipment for your wastewater or process separation needs through a one-week onsite pilot testing demonstration. This includes:
- Equipment and operator setup onsite, with minimal requirements for installation.
- Operation mirroring expected commercial processes, with automatic data logging and sample collection for analysis.
- Execution of Clean-in-Place cycles to demonstrate ease of cleaning and compatibility with your application.
- Involvement of your staff in the demonstration for hands-on learning about the equipment and operation.
- A comprehensive report summarizing the onsite pilot testing, aiming to refine commercial proposals.
Extend Your Testing with Equipment Rentals
For a more thorough evaluation, consider renting our equipment. This extended onsite pilot testing period allows for:
- An in-depth understanding of day-to-day and week-to-week process variability.
- Enhanced confidence in our system’s reliability through extended operation.
- Inclusion of onsite training and remote support for comprehensive data collection and analysis, available by the week or month.
These sections aim to seamlessly incorporate “onsite pilot testing” into the narrative, highlighting the practical and educational benefits of both the one-week demonstrations and the extended rental options.
Rentals
Want to demonstrate how our equipment works for longer than one week? Hold onto a rental skid for several weeks or months to gain better pilot data, understand day-to-day and week-to-week variability in your process fluid, and gain confidence in our system’s reliable performance. We typically rent equipment by the week or month and include onsite training and remote support for data collection and analysis.
Use our equipment and onsite expertise to validate performance with a one week or longer trial.
We continue to support rentals through remote access to the systems, collecting valuable performance metrics that allow us to size and quote a full-scale system.
Rely on our dedicated R&D Team to provide unique solutions to your wastewater and process separation challenges. By being onsite, we can learn more about your facility, discuss where full-scale equipment would ideally go, and train your staff about how our filter systems work.
Equipment Available
Vibratory Screen
- 18″ diameter screen
- Screens: 80, 120, 240, 500, 780, and 1000 microns
- Typical throughput: 5-10 GPM
- Requires one 120V standard outlet
Spiral Rental 01 & 02
- Model 800 Spiral Brush Filter
- 15, 25, 50, and 100 micron screens available
- 1 hp brush motor on VFD
- Automated 2″ purge valve
- Typical throughput: 15-30 GPM
- Skid includes 120 V submersible pump to move process solution through the unit if necessary
- Requires one 15 amp breaker (3-phase, 480V)
UF Rental 01
- Two-stage, continuous, feed-and-bleed filtration unit
- 15 ft2 total membrane area
- One 2 hp feed pump and two 3 hp recirculation pumps
- Fully automated start/stop/run and Clean-in-Place for unattended operation around the clock
- Can process material up to 190 F
- Typical throughput: 225-1500 GPD of permeate generated (dependent on flux rate)
- Requires one 15 amp breaker (3-phase, 480V)
UF Rental 02
- Two-stage, continuous, feed-and-bleed filtration unit
- 52.8 ft2 total membrane area
- One 2 hp feed pump and two 20 hp recirculation pumps
- Fully automated start/stop/run and Clean-in-Place for unattended operation around the clock
- Can process material up to 190 F
- Typical throughput: 792-5280 GPD of permeate generated (dependent on flux rate)
- Requires one 30 amp breaker (3-phase, 480V)
Skid Photos
Reference Articles
Fresh From The Blog
Farmington, CT, March 30th, 2023 - Mott Corporation announced today that it has acquired Digested Organics, a Michigan-based engineering company that manufactures advanced filtration solutions…
BC Organics is a 16-unit anaerobic digester in eastern Wisconsin. The site processes manure from 11 area dairy farmers
As summer winds down, the urgency to improve corporate sustainability continues to heat up. We have seen a record number of examples of how the…
As summer winds down, the urgency to improve corporate sustainability continues to heat up. We have seen a record number of examples of how the…
FAQs: Onsite pilot testing
What is onsite pilot testing?
Onsite pilot testing is a comprehensive evaluation process where experts bring equipment directly to your location to test and analyze your specific wastewater or process separation needs. This hands-on approach ensures the equipment is tailored and optimized for your operations.
How long does onsite pilot testing typically last?
A standard onsite pilot testing demonstration with Digested Organics usually spans one week, offering a detailed insight into the equipment’s performance and operational suitability for your application.
What preparations are needed for onsite pilot testing?
Minimal preparations are required, typically involving ensuring a single electrical connection and access to water and drains. Digested Organics provides a list ahead of time to facilitate smooth setup and operation.
Can I extend the testing period beyond one week?
Yes, Digested Organics offers rental options for extended onsite pilot testing, allowing for a more in-depth evaluation over several weeks or months to better understand the variability in your process and gain confidence in the system’s performance.
What does the onsite pilot testing process involve?
The process includes setting up the equipment, running it as per commercial operation expectations, logging data, collecting samples for analysis, performing Clean-in-Place cycles, and involving your staff in the process for educational purposes.
